10-32 Thread to 1/16 Inch O.D. Tubing, Straight Compression

CAD Model
Message

Related Products

Replacement Ferrules

Front and rear ferrules for metal and plastic tubing.

Configure Here
PEEK Replacement Ferrules

Single piece PEEK replacement ferrules

Configure Here
Replacement Screws

Compression screws in all available materials.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting.

Configure Here
Replacement O-Rings

O-Ring seals in all available materials.

Configure Here

Overview

Description: Miniature compression fitting with 10-32 external thread, for 1/16″ OD stiff plastic or metal tubing. It has a 5/16” hex body. The model with 0.067” through hole is designed to allow tubing or a 1/16” diameter thermocouple to pass all the way through the fitting.

Max Pressure Rating: Configurations with a 0.067” through hole are rated to 1,000 psig in nickel plated brass and 3,000 psig in stainless steel, when used with high pressure metal tubing. The configuration with 0.032” through hole is rated to 8,000 psig when used with high pressure tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Features

  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.

Note: “-ENP” configurations are supplied with electroless nickel plated brass body and screw. Ferrules are supplied in brass.