5/16-24 Thread to 1/4 Inch O.D. Tubing, Elbow Compression

CAD Model
Message

Related Products

Single Piece Replacement Ferrules

Single piece brass ferrules for brass MCBL-14-51624 models as well as replacement PEEK ferrules compatible with all materials.

Configure Here
Two Piece Replacement Ferrules

Front and rear ferrules. Compatible with stainless steel MCBL-14-51624-303 and MCBL-14-51624-316 models.

Configure Here
Replacement Nuts

Compression nuts for all available materials.

Configure Here

Overview

Description: Miniature compression fitting elbow with 5/16-24 external thread, for 1/4″ OD stiff plastic or metal tubing.

Max Pressure Rating: 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Body Material: 

Brass: 303 stainless steel stud with brass body, nut and single piece ferrule.

303 stainless steel: 303 stainless steel stud, body, nut and two piece ferrule.

Ferrule Material: When PEEK is selected, the metallic ferrule(s) are replaced with a single piece PEEK ferrule.

Note: When using our stainless steel ¼” compression fittings the use of isopropyl alcohol on the compression threads is recommended to aid installation and prevent galling. Should you have any questions please contact a Beswick applications engineer for additional information.

Features

  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.