1/4-28 Thread to 1/4 Inch O.D. Tubing, Elbow Compression

CAD Model
Message

Related Products

Single Piece Replacement Ferrules.

Single piece replacement PEEK ferrule.

Configure Here
Two Piece Replacement Ferrules

Front and rear ferrules. Compatible with stainless steel MCBL-1414-303 and MCBL-1414-316 models.

Configure Here
Replacement Nuts

Compression nuts for all available materials.

Configure Here
Pre-Swage Tools

Tools for pre-swaging ferrules onto tubing prior to assembling fitting.

Configure Here
Replacement O-Rings

O-Rings in all available materials for both body and stud seals.

Configure Here

Overview

Description: Miniature compression fitting elbow with ¼-28 external thread, for 1/4″ OD stiff plastic or metal tubing.

Max Pressure Rating: 3,000 psig in stainless steel, when used with high pressure metal tubing. When using stiff plastic tubing, the burst pressure of the tube is typically the limiting factor.

Ferrule Material: When PEEK is selected, the metallic ferrule(s) are replaced with a single piece PEEK ferrule.

Note: When using our stainless steel ¼” compression fittings the use of isopropyl alcohol on the compression threads is recommended to aid installation and prevent galling. Should you have any questions please contact a Beswick applications engineer for additional information.

Features

  • Beswick compression fittings give you the ability to operate at high pressures and temperatures while maintaining a small envelope.
  • Beswick’s ferrules provide for a leak-tight tubing connection while a captured O-ring ensures a reliable face seal for male threaded fittings.
  • Easy to install without special tools.